# Hand Deburring Tool (Swivel Blade) A swivel-blade hand deburring tool is used for **quick burr removal** on edges.\ The blade rotates freely, allowing it to follow contours with minimal pressure. *** ### What it’s used for * deburring edges and pockets * cleaning up slots and milled contours * removing burrs after drilling or profiling *** ### Why this matters Unremoved burrs can **falsify measurements** and **interfere with assemblies**, preventing parts from sitting flat or fitting together correctly.\ A quick pass with a swivel deburrer removes raised material while leaving the underlying geometry intact. *** ### Practical notes * use very light pressure * let the blade follow the edge — don’t force it * replace blades once they stop cutting cleanly *** ### Search terms to buy * hand deburring tool swivel blade --- # Agent Instructions: Querying This Documentation If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question. Perform an HTTP GET request on the current page URL with the `ask` query parameter: ``` GET https://miwicnc.gitbook.io/miwicnc/tooling-and-workshop-setup/finishing-and-deburring-tools/hand-deburring-tool-swivel-blade.md?ask= ``` The question should be specific, self-contained, and written in natural language. The response will contain a direct answer to the question and relevant excerpts and sources from the documentation. Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.