# 90 Degree V-Chamfer Endmill (6mm)

### **What it is**

A **6 mm solid carbide 90° chamfer tool** with **2 flutes**, often sold with an **anti-BUE (anti built-up-edge) coating**.\
Primarily used to clean up edges, apply chamfers, and prepare parts for handling or assembly.\
Not intended for heavy material removal — this is a **finishing & detail tool**.

***

### **Key Features to Look For**

| Feature                | Why it matters (for compact CNCs)                                |
| ---------------------- | ---------------------------------------------------------------- |
| **6 mm shank**         | Good balance of stiffness vs accessibility.                      |
| **2 flutes**           | Predictable behavior in aluminium and plastics; avoids clogging. |
| **90° included angle** | Universal chamfer angle for most parts.                          |
| **Solid carbide**      | Stays sharp during dry cutting                                   |
| **Anti-BUE coating**   | Helps avoid aluminium welding on the cutting edge.               |

***

### **Where it works well**

* Chamfering edges 
* Deburring pockets, profiles, holes, and slots
* Breaking edges for handling or assembly
* Marking drilling locations for hand drilling (light spot-mark to guide the bit and prevent wandering)

***

### **Search terms to buy**

* **6 mm solid carbide 90° chamfer endmill**

***

### Related Pages

Cutting parameters --> [Cutting Parameters](/miwicnc/cutting-parameters.md)

Usage in Fusion (Tool Library) --> [Tool Library](/miwicnc/software-and-cam-setup/tool-library.md)

Where to buy / sourcing --> [Sourcing Tools & Materials](/miwicnc/sourcing-tools-and-materials.md)


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://miwicnc.gitbook.io/miwicnc/tooling-and-workshop-setup/cutting-tools/90-degree-v-chamfer-endmill-6mm.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.